{"title":"Interior E36","description":"","products":[{"product_id":"aem-x-series-wideband-uego-afr-gauge-kit-30-0300","title":"AEM X-Series Wideband UEGO AFR Gauge Kit | 30-0300","description":"\u003cp\u003eAEM's X-Series Wideband Air\/Fuel Ratio Sensor Controllers are built upon unique, patented X-Digital technology (Patent 9,575,030), making them the fastest responding wideband air\/fuel ratio controllers in independent testing*.\u003c\/p\u003e\n\u003cp\u003eAEM co-developed its new wideband sensor with global automotive supplier FAE, culminating in a new design that has a faster response time and is less prone to failure in high performance vehicles. It can be used on EFI or carbureted applications, and in fuel systems using gasoline (including leaded race gas), methanol, ethanol, diesel, propane, and CNG.\u003c\/p\u003e\n\u003cp\u003eThe X-Series Wideband AFR Gauge (PN AEM 30-0300) mounting surface measures 2 1\/16th-inch (52mm) in diameter and features a modern center display that is 87% larger than the 30-4110 AEM Wideband Gauge's center display. Its slim depth (less than one inch overall) dramatically increases its application base and potential mounting locations.\u003c\/p\u003e\n\u003cp\u003eThe AEM Wideband X-Series AFR Gauge has a user configurable display via buttons on the gauge face that allows you to change between AFR, Lambda, or O2%, change the center display to three or four digits, perform a free-air calibration if desired, and change the CAN message ID when linking multiple X-Series Wideband Controllers.\u003c\/p\u003e\n\u003cp\u003eX-DIGITAL TECHNOLOGY\u003c\/p\u003e\n\u003cp\u003eX-Digital wideband technology gives these controllers the ability to read and report values that other controllers do not, which can deliver more optimized engine tuning and a safer overall operating condition. The controller's high-speed digital implementation ensures no loss of signal fidelity and full transient response, making it able to identify the slightest fluctuations in AFR and output them in full value.\u003c\/p\u003e\n\u003cp\u003eWHY RESPONSE TIME MATTERS\u003c\/p\u003e\n\u003cp\u003eFaster response time improves wideband feedback control, and can provide a safer, more powerful and accurate tune. AEM's Wideband Controllers with X-Digital technology can reduce deadtime and improve the performance of your vehicle through more accurate AFR tuning. Deadtime is the delay between when exhaust gas composition changes and when that change is reported by the O2 sensor. While flow of exhaust gases can affect deadtime, it is not the only source. Often, the sensing element’s response to the gas is the largest contributor to deadtime.\u003c\/p\u003e\n\u003cp\u003eWhen tuning an engine using wideband AFR feedback control, deadtime affects the data you are looking at because it is reported in a different operating location than when it occurred. This means whatever changes you make to the base fueling will likely be in the wrong timeframe. This can be particularly dangerous to high cylinder pressure applications, and EFI systems that use feedback control.\u003c\/p\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eX-Series Wideband UEGO AFR Controller Gauges were the fastest responding wideband air\/fuel ratio controllers in an independent test vs. 17 competitor wideband AFR controllers\u003c\/li\u003e\n\u003cli\u003ePatented X-Digital wideband technology (Patent 9,575,030)\u003c\/li\u003e\n\u003cli\u003eFactory calibrated resistor does not require free-air calibration, but can be free-air calibrated\u003c\/li\u003e\n\u003cli\u003eAuto-Sensor Detection between AEM FAE and Bosch LSU 4.9 wideband sensors\u003c\/li\u003e\n\u003cli\u003eCompatible with supply voltages up to 16V\u003c\/li\u003e\n\u003cli\u003e0-5V \u0026amp; RS232 output for data logging and feedback control, AEMnet (CANbus) for data logging and daisy-chaining multiple controllers up to 16 cylinders\u003c\/li\u003e\n\u003cli\u003e52mm gauge diameter and slim 0.825\" gauge depth(Gauge cup depth only .200\" deep)\u003c\/li\u003e\n\u003cli\u003eAuto-dimming feature\u003c\/li\u003e\n\u003cli\u003eUser-configurable display for changing between AFR, Lambda, and O2%, and 3- or 4-digit display\u003c\/li\u003e\n\u003cli\u003eBlack bezel and black double-sided faceplate included (silver bezel\/white faceplate option sold separately, PN 30-0300-ACC)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":51563312677181,"sku":"30-0300","price":222.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/7248\/0829\/files\/8c77faf18e246f1084456d7371e2d995__38288.jpg?v=1775678772"},{"product_id":"aem-x-series-temperature-gauge-kit-30-0302","title":"AEM X-Series Temperature Gauge Kit | 30-0302","description":"\u003cp\u003eAEM's 30-0302 X-Series 100-300 F\/40-150C Digital Gauge combine incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate water, transmission and\/or oil or temperature readouts in their high performance vehicle.\u003c\/p\u003e\n\u003cp\u003eNOTE: The 30-0302 comes with a black bezel and black water temperature faceplate. You will need to purchase the optional 30-0302-ACC accessory kit to get the silver bezel, white water, transmission and oil temp faceplates, and black transmission and oil temperature faceplates. Each faceplate is double sided with standard Fahrenheit on one side and Celsius on the other. The calibration for standard or metric display is easily performed using the buttons on the face of the gauge.\u003c\/p\u003e\n\u003cp\u003eEASIER TO READ\u003c\/p\u003e\n\u003cp\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED \"needle\" lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp\u003eEASIER TO MOUNT\u003c\/p\u003e\n\u003cp\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825\", with a cup depth of only 0.200.\" This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp\u003eSMARTER INTERFACE\u003c\/p\u003e\n\u003cp\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli\u003eSlim 0.825\" overall gauge depth and 0.200\" cup depth - mount them virtually anywhere!\u003c\/li\u003e\n\u003cli\u003eProgrammable center LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli\u003eUser selectable standard or metric display (100-300F\/40-150C)\u003c\/li\u003e\n\u003cli\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli\u003eUser selectable threshold warnings\u003c\/li\u003e\n\u003cli\u003eOptional silver bezel and white faceplate accessory kit available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":51563317592381,"sku":"30-0302","price":232.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/7248\/0829\/files\/0599942bfe20415e46867a06c502b604__87504.jpg?v=1775679122"},{"product_id":"aem-x-series-egt-gauge-kit-30-0305","title":"AEM X-Series EGT Gauge Kit | 30-0305","description":"\u003cp\u003eAEM's 30-0305 X-Series 0-1800F\/0-1000C Digital Exhaust Gas Temperature (EGT) gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want a highly accurate EGT readout in their high performance vehicle.\u003c\/p\u003e\n\u003cp\u003eNOTE: The 30-0305 comes with a black bezel and reversible Fahrenheit\/Celsius black EGT faceplate. You will need to purchase the optional 30-0305-ACC accessory kit to get the silver bezel and reversible white EGT faceplate. The calibration for standard or metric display is easily performed using the buttons on the face of the gauge.\u003c\/p\u003e\n\u003cp\u003eEASIER TO READ\u003c\/p\u003e\n\u003cp\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED \"needle\" lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp\u003eEASIER TO MOUNT\u003c\/p\u003e\n\u003cp\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825\", with a cup depth of only 0.200.\" This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp\u003eSMARTER INTERFACE\u003c\/p\u003e\n\u003cp\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli\u003eSlim 0.825\" overall gauge depth and 0.200\" cup depth - mount them virtually anywhere!\u003c\/li\u003e\n\u003cli\u003eProgrammable center LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli\u003eUser selectable threshold warnings (excl. Volts)\u003c\/li\u003e\n\u003cli\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli\u003eUser selectable threshold warnings\u003c\/li\u003e\n\u003cli\u003eOptional silver bezel and white faceplate accessory kit available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":51563352916285,"sku":"30-0305","price":334.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/7248\/0829\/files\/3691ccbfa61389b4fde877b2c39ab323__97467.jpg?v=1775679392"},{"product_id":"aem-classic-digital-fuel-or-oil-pressure-gauge-kit-30-4401","title":"AEM Classic Digital Fuel or OIL Pressure Gauge Kit | 30-4401","description":"\u003cp\u003eAEM Digital Oil and Fuel Pressure Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays oil pressure in 1 PSI increments, and a sweeping LED \"needle\" that lines the edge and moves as oil pressure changes from 0 to 100. The oil pressure gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.\u003c\/p\u003e\n\u003cp\u003eAEM's digital oil pressure gauges include a 0-5v analog output for use with data loggers and virtually any engine management system, such as the Infinity ECU, Series 2 EMS or AQ-1 Data Logger, making them the perfect solution for users who need to monitor and data log oil pressure at high RPM on tuned engines. Each engine pressure gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge.\u003c\/p\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for carbureted or EFI vehicles\u003c\/li\u003e\n\u003cli\u003eEasy-to-install Plug \u0026amp; Play harness and sensor included\u003c\/li\u003e\n\u003cli\u003e24 green LED display lights provide immediate reference to monitored engine function\u003c\/li\u003e\n\u003cli\u003eThree digit readout in center\u003c\/li\u003e\n\u003cli\u003eEach gauge comes with interchangeable black\/silver bezels and black\/white faceplates\u003c\/li\u003e\n\u003cli\u003e0-5V analog output included for use with data loggers and virtually any engine management system\u003c\/li\u003e\n\u003cli\u003eAuto-dimming gauge face and read out lighting\u003c\/li\u003e\n\u003cli\u003eBrass sensor included\u003c\/li\u003e\n\u003cli\u003eStandard 52mm (2-1\/16\") gauge housing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":51563388338493,"sku":"30-4401","price":216.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/7248\/0829\/files\/0dbe6bf90265693485aeef4c03bda651__91463.jpg?v=1775679541"},{"product_id":"aem-cd-7l-carbon-logging-display-30-5701","title":"AEM CD-7L Carbon Logging Display | 30-5701","description":"\u003cp\u003eCD-7 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.\u003c\/p\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFull color 7\" screen with 800x480 resolution\u003c\/li\u003e\n\u003cli\u003eDirect sunlight readable (1000cd\/m2 brightness and anti-glare filter)\u003c\/li\u003e\n\u003cli\u003eLayout files interchangeable with all versions of the CD-5 Carbon\u003c\/li\u003e\n\u003cli\u003eWiring interface\/harness is identical to the CD-5 Carbon\u003c\/li\u003e\n\u003cli\u003eRugged, lightweight flow-molded carbon fiber composite enclosure\u003c\/li\u003e\n\u003cli\u003eTotal display weight of 20.9 oz. \/ 595 grams\u003c\/li\u003e\n\u003cli\u003eIP65 water resistance - open cockpit, marine and motorcycle safe\u003c\/li\u003e\n\u003cli\u003eAccepts channels from two separate user programmable CAN bus connections - works with AEMnet enabled devices and non-AEM 3rd party devices side by side\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs\u003c\/li\u003e\n\u003cli\u003eAccepts channels from 2008-up factory ECUs using Plug \u0026amp; Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)\u003c\/li\u003e\n\u003cli\u003eInstall the CD-7 Carbon on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212, sold separately)\u003c\/li\u003e\n\u003cli\u003eAvailable with or without 200Mb internal logging (up to 1,000Hz\/channel)\u003c\/li\u003e\n\u003cli\u003eAvailable with or without on-board 20Hz GPS receiver and antenna\u003c\/li\u003e\n\u003cli\u003eAdd a Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)\u003c\/li\u003e\n\u003cli\u003eAdd an 8 Channel K-Type EGT CAN Module for 8 additional temps via AEMnet CAN bus (PN 30-2224, sold separately)\u003c\/li\u003e\n\u003cli\u003eSeven programmable pages including four Main pages, Alarm, On-Change and Start-up pages\u003c\/li\u003e\n\u003cli\u003eDedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)\u003c\/li\u003e\n\u003cli\u003eUnique On-Change page can be used to identify map switching for boost, traction, lap times, etc.\u003c\/li\u003e\n\u003cli\u003eUse included page layouts and input your channels and text, or create your own from scratch\u003c\/li\u003e\n\u003cli\u003eFree DashDesign Graphics Editor software\u003c\/li\u003e\n\u003cli\u003eSeven LED RPM\/shift light indicators on top of the housing (programmable and dimmable)\u003c\/li\u003e\n\u003cli\u003eTwo programmable LEDs\u003c\/li\u003e\n\u003cli\u003eOdometer function\u003c\/li\u003e\n\u003cli\u003eOver 200 supplied fully programmable SAE and custom warning icons, and you can add your own\u003c\/li\u003e\n\u003cli\u003e'Headlight-in' connection dims the dash and LEDs during night operation\u003c\/li\u003e\n\u003cli\u003eTwo extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)\u003c\/li\u003e\n\u003cli\u003eUser supplied graphics can be changed based on channel values (up to the full screen size)\u003c\/li\u003e\n\u003cli\u003eConvert CAN bus channel values to user-defined text in multiple languages\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":51563413995837,"sku":null,"price":2049.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/7248\/0829\/files\/626e970748cd5148ddea288da3139fed__94830.jpg?v=1775679787"},{"product_id":"aem-cd-5l-carbon-logging-display-30-5601","title":"AEM CD-5L Carbon Logging Display | 30-5601","description":"\u003cp\u003eCD-5 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.\u003c\/p\u003e\n\u003cp\u003eVIEW AND LOG DATA FROM OVER 250 CAN DEVICES!\u003c\/p\u003e\n\u003cp\u003eThe CD-5 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and\/or 3rd-party CAN signals. We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port (see Supported Apps Tab), and the CD-5 Carbon can be added to any vehicle with the addition of our 22 Channel CAN Sensor Module. The CD-5 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go! All channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screen dashboard monitor or warning alerts.\u003c\/p\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFull color 5\" screen with 800x480 resolution\u003c\/li\u003e\n\u003cli\u003eDirect sunlight readable (1000cd\/m2 brightness and anti-glare filter)\u003c\/li\u003e\n\u003cli\u003eLayout files interchangeable with all versions of the CD-7\u003c\/li\u003e\n\u003cli\u003eWiring interface\/harness is identical to the CD-7\u003c\/li\u003e\n\u003cli\u003eRugged, lightweight flow-molded carbon fiber composite enclosure\u003c\/li\u003e\n\u003cli\u003eTotal display weight of 11.7 oz.\/331 grams\u003c\/li\u003e\n\u003cli\u003eIP66 water resistance allows for operation in boats and motorcycles without worry\u003c\/li\u003e\n\u003cli\u003eAccepts channels from two separate user programmable CAN bus connections - works with AEMnet enabled devices and non-AEM 3rd party devices side by side\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs\u003c\/li\u003e\n\u003cli\u003eAccepts channels from 2008-up factory ECUs using Plug \u0026amp; Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)\u003c\/li\u003e\n\u003cli\u003eInstall the CD-5 Carbon on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212, sold separately)\u003c\/li\u003e\n\u003cli\u003eAvailable with or without 200Mb internal logging (up to 1,000Hz\/channel)\u003c\/li\u003e\n\u003cli\u003eAvailable with or without on-board GPS receiver and antenna\u003c\/li\u003e\n\u003cli\u003eAdd Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)\u003c\/li\u003e\n\u003cli\u003eSeven programmable pages including four Main pages, Alarm, On-Change and Start-up pages\u003c\/li\u003e\n\u003cli\u003eDedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)\u003c\/li\u003e\n\u003cli\u003eUnique On-Change page can be used to identify map switching for boost, traction, lap times, etc.\u003c\/li\u003e\n\u003cli\u003eUse included page layouts and input your channels and text, or create your own from scratch\u003c\/li\u003e\n\u003cli\u003eFree DashDesign Graphics Editor software\u003c\/li\u003e\n\u003cli\u003eSeven LED RPM\/shift light indicators on top of the housing (programmable and dimmable)\u003c\/li\u003e\n\u003cli\u003eTwo programmable LEDs\u003c\/li\u003e\n\u003cli\u003eOdometer function\u003c\/li\u003e\n\u003cli\u003eOver 200 supplied fully programmable SAE and custom warning icons, and you can add your own\u003c\/li\u003e\n\u003cli\u003e'Headlight-in' connection dims the dash and LEDs during night operation\u003c\/li\u003e\n\u003cli\u003eTwo extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)\u003c\/li\u003e\n\u003cli\u003eUser supplied graphics can be changed based on channel values (up to the full screen size)\u003c\/li\u003e\n\u003cli\u003eConvert CAN bus channel values to user-defined text in multiple languages\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PEAK","offers":[{"title":"Default Title","offer_id":51563439849789,"sku":"30-5601","price":1040.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/7248\/0829\/files\/9aae861d9be9c69cc242c2819fd72241__84031.jpg?v=1775679957"},{"product_id":"bmw-3-series-e36-1991-1999-racing-pedals-grid-satin","title":"BMW 3 Series E36 1991-1999 Racing Pedals - GRID SATIN","description":"\u003cp data-start=\"201\" data-end=\"242\"\u003e \u003c\/p\u003e\n\u003cp data-start=\"201\" data-end=\"242\"\u003e\u003cem data-start=\"201\" data-end=\"242\"\u003e(Fits 1992–1999 3 Series, including M3)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-start=\"244\" data-end=\"285\"\u003e🔧\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-start=\"247\" data-end=\"285\"\u003eBuilt for Precision and Pedal Feel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"287\" data-end=\"513\"\u003eImprove grip, control, and heel-toe performance with CNC-machined aluminum pedals designed specifically for the BMW E36.\u003cbr data-start=\"407\" data-end=\"410\"\u003e✔ Built to order in the USA\u003c\/p\u003e\n\u003cp data-start=\"287\" data-end=\"513\"\u003e✔ Secure installation\u003c\/p\u003e\n\u003cp data-start=\"515\" data-end=\"597\"\u003e\u003cstrong data-start=\"515\" data-end=\"540\"\u003eFull Details Below 👇\u003c\/strong\u003e\u003cbr data-start=\"540\" data-end=\"543\"\u003e\u003cstrong data-start=\"543\" data-end=\"597\"\u003ePrecision Fit, Maximum Grip, Driver-Focused Design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"599\" data-end=\"820\"\u003eSRP Racing Pedals are made for E36 drivers who want sharper control and smoother heel-toe downshifts. Whether you're daily driving or carving the corners, these pedals deliver improved grip and a connected feel underfoot.\u003c\/p\u003e\n\u003cp data-start=\"822\" data-end=\"855\"\u003e\u003cstrong data-start=\"822\" data-end=\"855\"\u003eWhy Choose SRP Racing Pedals?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"857\" data-end=\"1211\"\u003e✅\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-start=\"859\" data-end=\"879\"\u003ePerformance Grip\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Machined surfaces reduce foot slippage\u003cbr data-start=\"920\" data-end=\"923\"\u003e✅\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-start=\"925\" data-end=\"943\"\u003eHeel-Toe Ready\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Choose from two gas pedal widths to suit your driving style\u003cbr data-start=\"1005\" data-end=\"1008\"\u003e✅\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-start=\"1010\" data-end=\"1033\"\u003eSecure Installation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Application-specific fit. Drilling required\u003cbr data-start=\"1079\" data-end=\"1082\"\u003e✅\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-start=\"1084\" data-end=\"1103\"\u003eMade in the USA\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Built in North Carolina since 1995\u003c\/p\u003e\n\u003cp data-start=\"1311\" data-end=\"1469\"\u003e\u003cstrong data-start=\"1311\" data-end=\"1331\"\u003eVehicle Fitment:\u003c\/strong\u003e\u003cbr data-start=\"1331\" data-end=\"1334\"\u003eBMW 3 Series (E36 chassis, 1992–1999)\u003cbr data-start=\"1371\" data-end=\"1374\"\u003eIncludes 318i, 325i, 328i, M3, and convertible models\u003cbr data-start=\"1427\" data-end=\"1430\"\u003eFits Manual transmissions\u003c\/p\u003e\n\u003cp data-start=\"1471\" data-end=\"1581\"\u003e\u003cstrong data-start=\"1471\" data-end=\"1490\"\u003eShipping Times:\u003c\/strong\u003e\u003cbr data-start=\"1490\" data-end=\"1493\"\u003e• 3–7 business days\u003c\/p\u003e","brand":"SRP","offers":[{"title":"Default Title","offer_id":51648182485309,"sku":"SRPRACINGE36","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/7248\/0829\/files\/BMWGridSatin_1_900_b3d0ee4c-b0a4-420e-aab5-746f1c3eb7e6.webp?v=1777409466"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0937\/7248\/0829\/collections\/tsr_interier_deb82bef-d34a-4264-8cce-71351e38dbf3.webp?v=1773770586","url":"https:\/\/trackspecracing.com\/collections\/interior-e36.oembed","provider":"Track Spec Racing","version":"1.0","type":"link"}